ADA4062-2

Rev. 0 | Page 4 of

20

ABSOLUTE MAXIMUM RATINGS

THERMAL RESISTANCE

Table 3.

Parameter

Rating

Supply Voltage

±18 V

Input Voltage

Differential Input Voltage

Output Short-Circuit Duration to GND

Indefinite

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

−40°C to +125°C

Junction Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

soldered in a circuit board for surface-mount packages. It was

measured using a standard 2-layer board.

Table 4. Thermal Resistance

Package Type

Unit

8-Lead SOIC

158

43

°C/W

8-Lead MSOP

210

45

°C/W

POWER SEQUENCING

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

The op amp supply voltages must be established simultaneously

with, or before, any input signals are applied. If this is not

possible, the input current must be limited to 10 mA.

ESD CAUTION