Rev.02.16.07

NFS110 Series

3 of 4

Embedded Power for

Business-Critical Continuity

Specifications Contd.

Notes

1

Convection cooled, 80 W maximum.

2

Peak outputs lasting less than 60 seconds with duty cycle less than 10%. Total

peak power must not exceed 110 W.

3

Forced air, 20 CFM at 1 atmosphere, 110 W maximum.

4

Figure is peak-to-peak. Output ripple is measured across a 50 MHz bandwidth

using a 12 inch twisted pair terminated with a 47 μF capacitor.

5

Total regulation is defined as the static output regulation at 25 °C, including

initial tolerance, line voltage within stated limits and output voltages adjusted

to their factory settings.

6

To achieve stated regulation on the 24 V output on the NFS110-7602PJ, the

The +24 V output will maintain ±5.0% regulation under the following additional

7

Single output models have floating outputs which may be referenced as either

positive or negative. Higher voltage supplies may be adjusted over a wide

output voltage range, as long as the total output power does not exceed 80

Watts (natural convection) or 110 Watts (forced air).

8

Power fail detect not available on single output models.

9

Derating curve is application specific for ambient temperatures >50 °C, for

optimum reliability no part of the heatsink should exceed 90 ºC and no

semiconductor case temperature should exceed 100 ºC.

10 Caution: Allow a minimum of 1 second after disconnecting the power when

making thermal measurements.

11 Three orthogonal axes, random vibration, 10 minute test for each axis.

12 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

13 Artesyn Technologies recommends a minimum load of 11 W to achieve the

design MTBF. See the derating curve on page 3.

14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE

RoHS 5/6 (non Pb-free) compliant versions may be available on special request,

please contact your local sales representative for details.

15 NOTICE: Some models do not support all options. Please contact your local

Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

OUTPUT

OUTPUT CURRENTS

TOTAL

VOLTAGE

+5.1 V

8 A

20 A

10 A

50 mV

±2.0%

NFS110-7601PJ

+12 V

4.5 A

9 A

5 A

120 mV

±3.0%

–12 V

0.5 A

1.5 A

1 A

120 mV

±3.0%

–5 V

0.5 A

1.5 A

1 A

50 mV

±3.0%

8 A

20 A

10 A

50 mV

±2.0%

3.5 A

4.5 A

4.5 A

240 mV

+10/–5.0%

+12 V

4.5 A

9 A

5 A

120 mV

±3.0%

–12 V

0.5 A

1.5 A

1 A

120 mV

±3.0%

+5.1 V

8 A

20 A

10 A

50 mV

±2.0%

NFS110-7604PJ

+15 V

4 A

7.5 A

5 A

150 mV

±3.0%

–15 V

0.5 A

1.5 A

1 A

150 mV

±3.0%

–5 V

0.5 A

1.5 A

1 A

50 mV

±3.0%

5.1 V

16 A

22 A

20 A

50 mV

±2.0%

12 V

7 A

9 A

9 A

120 mV

±2.0%

15 V

5 A

7.3 A

7.3 A

150 mV

±2.0%

24 V

3.5 A

4.5 A

4.5 A

240 mV

±2.0%

TRANSIENT RESPONSE

NFS110-7601PJ

+5.1 V (7.5 A to 10 A)

150 mV peak,

1 ms recovery

+12 V (2.5 A to 5 A)

100 mV peak,

0.5 ms recovery

-12 V (0.5 A to 1 A)

100 mV peak,

0.5 ms recovery

-5 V (0.5 A to 1 A)

100 mV peak,

0.5 ms recovery

NFS110-7602PJ

+5.1V (7.5 A to 10 A)

150 mV peak,

1 ms recovery

+24 V (1.5 A to 3 A)

300 mV peak,

1 ms recovery

+12 V (2.5 A to 5 A)

100 mV peak,

0.5 ms recovery

-12 V (0.5 A to 1 A)

100 mV peak,

0.5 ms recovery

NFS110-7604PJ

+5.1 V (7.5 A to 10 A)

150 mV peak,

1 ms recovery

+15 V (2.5 A to 5 A)

100 mV peak,

0.5 ms recovery

-15 V (0.5 A to 1 A)

100 mV peak,

0.5 ms recovery

-5 V (0.5 A to 1 A)

100 mV peak,

0.5 ms recovery

NFS110-7605J

+5.1 V (10 A to 20 A)

250 mV peak,

1 ms recovery

NFS110-7612J

+12 V (4.5 A to 9 A)

360 mV peak,

1 ms recovery

NFS110-7615J

+15 V (3.65 A to 7.3 A)

450 mV peak,

1 ms recovery

NFS110-7624J

+24V (2.25 A to 4.5 A)

720 mV peak,

1 ms recovery