For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1

Free air convection.

Multiple output units: maximum continuous output power not to exceed

2

300 LFM forced air cooling from the longer side.

Multiple output units: maximum continuous output power not to exceed

3

Peak power at 115% lasting less than 30 seconds with duty cycle less than

5%. During peak loading, output voltage may exceed total regulation limits.

4

Figure is peak-to-peak for room temperature rating. Output noise

measurements are made across a 20 MHz bandwidth using a 6 inch

twisted pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF

ceramic capacitor.

5

Minimum load required for correct start-up and operation on single outputs

and on main output of multiple versions. Failure to observe minimum load

on main output will not allow the supply to start-up correctly. Some

electronic test loads have a large delay time before they start drawing

current even though the voltage from the supply is present. During this time

delay, there is no load on the output and as a result, the supply may not be

able to start-up properly and maintain its correct output voltage. In these

instances, a dummy resistive load across the output may be necessary to

load the output of the supply until the test load can function correctly and

draw the intended minimum load. Minimum load required on auxiliary

outputs to maintain regulation.

6

Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G

rms 5 Hz to 500 Hz.

7

For optimum reliability no part of the heatsink should exceed 110 °C and

no semi-conductor case temperature should exceed 115 °C.

8

CAUTION: Allow a minimum of 1 second after disconnecting line power

when making thermal measurements.

9

This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

power supply mounted on a grounded metal sheet extending 1 inch

beyond each edge, using an unshielded cable. No external filtering required

during conducted emissions testing but some applications may require

additional filtering to achieve system compliance. Compliance with

Radiated EMI specifications may require mounting in a suitable enclosure.

in the end use product.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

NLP150L Series

Single and triple outputs

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES

110-150 W AC/DC Universal Input Switch Mode Power Supplies

2

File Name: nlp150lst.pdf Rev (03): 08 Nov 2005

International Safety Standard Approvals

VDE0805/EN60950/IEC950 File No. 10401-3336-0162

Licence No. 123897

UL1950 File No. E136005

DERATING CURVE

Output Power (Watts)

0

°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C

55W

110W

150W

300 LFM FORCED

AIR COOLING

75W

NATURAL

CONVECTION

COOLING

OUTPUT

OUTPUT CURRENT

TOTAL

MODEL

VOLTAGE

REGULATION

22 A

30 A

50 mV

±2.0%

NLP150L-96S3J

22 A

30 A

50 mV

±2.0%

NLP150L-96S5J

0.3 A

9.2 A

12.5 A

120 mV

±2.0%

NLP150L-96S6J

0.15 A

4.6 A

6.5 A

240 mV

±2.0%

NLP150L-96S8J

0.1 A

2.3 A

3.2 A

480 mV

±2.0%

NLP150L-96S9J

1.5 A

20 A

30 A

50 mV

±2.0%

NLP150L-96T536J

0.5 A

10 A

15 A

50 mV

±2.0%

120 mV

±5.0%

0.6 A

9.2 A

12.5 A

120 mV

±2.0%

NLP150L-96T658J

0.5 A

6 A

8 A

50 mV

±2.0%

240 mV

±5.0%