SIL06C datasheet(2/3 Pages) EMERSON-NETWORKPOWER

2 / 3 page

otte

di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to

0.75 lo max. and 0.75 lo max. to 0.5 lo max.

Measured with external filter. See Application Note 131 for details.

Power up is the time from application of dc input to Power Good

enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good

enabled

This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

The standard unit with the suffix '-V' is for vertical mounting. To order a

unit with horizontal mounting, please add the suffix '-H' to the model

number, e.g. SIL06C-05SADJ-HJ.

Measured as per recommended set-up. Cin = 270 µF (20 m

Ω esr max.).

Cout = 680 µF (10 m

Ω esr max.).

Uses external resistor from trim to output ground. Minimum value 485

Ω

for 5 V model, 280

Ω for 12 V model. See Applications Note 131 for

details.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

SIL06C Series

5 Vin and 12 Vin single output

DC-DC CONVERTERS

C Class Non-isolated

NEW Product

OUTPUT

INPUT

OVP

OUTPUT

EFFICIENCY

REGULATION

MODEL

POWER

VOLTAGE

(12)

CURRENT

(TYP.)

LINE

LOAD

NUMBER

(5,13,14,15)

(MAX.)

(MIN.)

(MAX.)

20 W

4.5-5.5 Vdc

N/A

0.9-3.3 Vdc

0 A

6 A

89%

±0.2%

±0.5%

SIL06C-05SADJ-VJ

30 W

10.2-13.8 Vdc

N/A

0.9-5.0 Vdc

0 A

6 A

91%

±0.2%

±0.5%

SIL06C-12SADJ-VJ

Riip

plle

e a

d N

oiis

e S

ciiffiic

attiio

Output

Model

Voltage

Pk - Pk

RMS

5 V input models

0.9-2.5 Vdc

30 mV

15 mV

3.3 Vdc

40 mV

15 mV

12 V input models

0.9-2.5 Vdc

40 mV

20 mV

3.3-5 dcV

50 mV

20 mV

File Name: sil06c.pdf Rev (02): 16 Dec 2005

SIL06C-12SADJ-VJ

Part Number System with Options

Rated Output Current

06 = 6 Amps

Number of Outputs

SADJ = Single Adjustable Output

Product Family

SIL = Single in Line

Performance

C = Cost Optimised

Input Voltage

05 = 4.5 Vdc to 5.5 Vdc

12 = 10.2 Vdc to 13.8 Vdc

The ultra-wide output voltage trim range offers major advantages to users who

select the SIL06C series. It is no longer necessary to purchase a variety of

modules in order to cover different output voltages. The output voltage can be

trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter

leaves the factory the output has been adjusted to the default voltage of 0.9 V

uttp

utt V

olltta

e A

djju

sttm

ntt o

off tth

e S

SIIL

C S

erriie

Mounting Option

V = Vertical Mount

H = Horizontal Mount

Packaging Options (14)

J = Pb-free (RoHS 6/6 compliant)

otte

s c

dtt..

Signal line assumed <3 m.

External input fusing recommended.

10 See Application Note 131 for operation above 50 ºC.

11 See Application Note 131 for more details.

12 These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to

3.3 Vdc and 12 Vin has an output of 0.9 Vdc to 5 Vdc. An external

resistor adjusts the output voltage.

13 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the

model number, e.g. SIL06C-05SADJ-HP4J.

14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

15 NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool

at http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

SIL06C 数据表(PDF) 2 Page - Emerson Network Power

SIL06C 数据表(HTML) 2 Page - Emerson Network Power

Html Pages

1 2 3

数据表下载