Model CPCI32FF

Specification

(25oC and Vs+15 Vdc)

32 Channel Filter Board

2

25 Locust St., Haverhill, Massachusetts 01830

• Tel: 800/252-7074, 978/374-0761 • FAX:978/521-1839

e-mail: sales@freqdev.com

• Web Address: http://www.freqdev.com

Analog Input

1. Impedance

1 G

Ω / 47pF

2. Input Range

±10V pk. linear

3. Maximum Input

±40V

4. Common Mode Rejection

75 dB min. @ 60 Hz.

Analog Output (each leg)

5. Impedance

1.0

Ω typ., 10 Ω max.

6. Linear Operating Range

±10V pk.

7. Channel to Channel Crosstalk

<-80 dB max. @ 10 kHz

8. Maximum Current

±5mA

9. Offset Voltage

±5mV max.

10. Offset Temp. Coeff.

20

µV/°C

11. Short Circuit Protection

Short to Ground

12. Peak Distortion @ 1 kHz, 3.54 Vrms

-80 dBc max.

Filter Characteristics

13. Fixed Cut-off Frequency fc (-3dB)

1.00 Hz to 100 kHz

See D72 or D74 Series specifications

Gain

14. Nominal Gain

1X, 10X, 100X, 1000X – Factory set

15. Accuracy

±1%

Power Supply

16. From CPCI Backplane

+12 V and -12 V,

± 5%, 1.0 A max. each

17. Isolation (default)

Analog ground isolated from back plane and chassis.

Connection to ground/backplane common by jumper.

Environmental

18. Operating

0°C to +70°C

19. Storage

-25°C to +85°C

20. Humidity

0-95% non-condensing

Mechanical

21. Card Size

CPCI 6U single slot 9.17 x 6.3 inches, (233 x160 mm)

22. No. of Input Channels

32 Single or differential, DC coupled

23. No. of Output Channels

32 Single or differential, DC coupled

24. Mating Connectors

Input: Female high-density 78-pin D-sub

Output: Male high-density 78-pin D-sub

25. Weight

~2 lbs., (0.91 kg.)

Ordering Information

Gain Options

1X, 10X, 100X, 1000X

CPCI32FF-S32D-10X

Input

Output

S – Single Ended

S – Single Ended

D – Differential

D – Differential

We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,

recommendations or suggestions herein in conjunction with our conditions of sale, which apply, to all goods supplied by us. We assume no responsibility for the use of these statements,

recommendations or suggestions, nor do we intend them as a recommendation for any use, which would infringe any patent or copyright.