MIZ-24S Mini Horn Series CS-2232 06/01/04

Page 1 of 2

Wheelock MIZ-24S

Mini Horn Series

Description

Wheelock Series MIZ piezoelectric Mini

Horns are compact electronic alarm ap-

pliances that are listed under UL Stan-

dard 464 for Audible Appliances in Pub-

lic Mode Fire Protection Systems. The

Series MIZ-24S models provide a field

selectable Continuous or Code 3 horn

tone when connected directly to a fire

alarm control panel. They can also pro-

vide a synchronized code 3 horn tone

when used in conjunction with

Wheelock’s Sync Module (SM), Dual

Sync Module (DSM) or a power supply

with the patented Wheelock Sync pro-

tocol. The series MIZ appliances are at-

tractive, offer high sound output along

with low current draw and are ideal for

alarm signaling in individual rooms,

apartments, hotels, motels and offices.

Color choices of red or off-white will blend

with any décor.

General Notes

to 120º F (0º C to 49º C) and maximum humidity of 93% RH ±2%.

16-33 VDC (for 24 VDC MIZ-24S models)

Features

Temporal (Code 3) or Continuous

Horn

used with Wheelock’s Sync

Module

NFPA/ANSI standards

standard single-gang box

screws

for flush mounting

screw terminals using

current draw

Applications:

•

Individual Rooms

•

Apartments

•

Hotels

•

Motels

•

Offices

Listings

Listings and approvals below

apply to the basic Wheelock

MIZ-24S Mini Horn Series. In

some cases, certain modules

may not be listed by certain

approval agencies, or listing may

be in process. Consult factory

for latest listing status.

• UL Listed: file E5946.

• ULC Listed: file CS243.

• MEA approved: file 151-92-E.

• FM Approved.

• CSFM approved: file 7135-

0785:115

CAUTION: Audible Horn appliances are not designed to be used on coded

systems in which the applied voltage is cycled on and off.

Wheelock products must be used within their published specifications and

must be PROPERLY specified, applied, installed, operated, maintained and

operationally tested in accordance with their installation instructions at the

time of installation and at least twice a year or more often and in accordance

with local, state and federal codes, regulations and laws. Specification,

application, installation, operation, maintenance and testing must be

performed by qualified personnel for proper operation in accordance with all

of the latest National Fire Protection Association (NFPA), Underwriters’

Laboratories (UL), National Electrical Code (NEC), Occupational Safety and

Health Administration (OSHA), local, state, county, province, district, federal

and other applicable building and fire standards, guidelines, regulations,

laws and codes including, but not limited to, all appendices and amendments

and the requirements of the local authority having jurisdiction (AHJ).