CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Radial Lead

CAT. No. E1001E

@Super low ESR, high temperature resistance

@Large capacitance & Improved high ripple current capability

@2000 hours at 105C

@Suitable for DC-DC converters, voltage regulators and decoupling applications

For computer motherboards

@Pb-free design

?SPECIFICATIONS

(at 20C, 120Hz)

(at 105C)

(at 20C after 2 minutes)

(at 20C, 120Hz)

Category

Temperature Range

Rated Voltage Range

Capacitance Tolerance

Surge Voltage

Leakage Current

*Note

Dissipation Factor

(tane)

Low Temperature

Characteristics

Endurance

Bias Humidity Test

Surge Voltage Test

Failure Rate

Items

-55 to +105C

P20% (M)

Rated voltageB1.15V

I=0.2CV (max.)

0.12 max.

Max. impedance ratio at 100kHz to the 20C value

Z(-25C)/Z(+20C)[1.15

Z(-55C)/Z(+20C)[1.25

The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours

at 105C.

Appearance

No significant damage

Capacitance change

[P20% of the initial measured value

D.F. (tanE)

[150% of the initial specified value

ESR

[150% of the initial specified value

Leakage current

[The initial specified value

The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,

90 to 95% RH for 500 hours.

Appearance

No significant damage

Capacitance change

[P20% of the initial measured value

D.F. (tanE)

[150% of the initial specified value

ESR

[150% of the initial specified value

Leakage current

[The initial specified value

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds

through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.

Appearance

No significant damage

Capacitance change

[P20% of the initial measured value

D.F. (tanE)

[150% of the initial specified value

ESR

[150% of the initial specified value

Leakage current

[The initial specified value

1% per 1000 hours maximum (Confidence level 60% at 105C)

Characteristics

?DIMENSIONS [mm]

?MARKING

*Note : If any doubt arises, measure the leakage current after the following voltage treatment.

Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.

fD

L

F

8

11.5

3.5

10

12.5

5.0

Coated Case

L+1.5 max.

15min.

4min.

820

EX) 4V820MF

@Terminal Code : E

(1/2)