Page 1

HPR10XX

REV D

8/2007

HPR10XX

Notes: All dimensions are in inches (millimeters).

GRID: 0.100 inches (2.54 millimeters)

PIN PLACEMENT TOLERANCE: ± 0.015"

Internet: http://www.cd4power.com

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Phone: 520.295.4100

Fax: 520.770.9369

Power Electronics Division, Europe

C&D Technologies (Power Electronics) Ltd.

132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland

Tel: +353.61.474.133

Fax:+353.61.474.141

FEATURES

l

LOW COST

l

SINGLE-IN-LINE PACKAGE (SIP)

l

INTERNAL INPUT AND OUTPUT FILTERING

l

NON-CONDUCTIVE CASE

l

HIGH OUTPUT POWER DENSITY:

l

EXTENDED TEMPERATURE RANGE:

-25°C TO +65°C

l

HIGH EFFICIENCY: TO 72% TYPICAL

DESCRIPTION

The HPR10XX Series uses advanced circuit design and packag-

ing technology to deliver superior reliability and performance.

A 170kHz push-pull oscillator is used in the input stage. Beat-

frequency oscillation problems are reduced when using the

HPR10XX Series with high frequency isolation amplifiers.

Reduced parts count and high efficiency add to the reliability

of the HPR10XX Series. The high efficiency of the HPR10XX

Series means less internal power dissipation, as low as 190mW.

With reduced heat dissipation the HPR10XX Series can operate

at higher temperatures with no degradation. In addition, the high

efficiency of the HPR10XX Series means the series is able to

tion down to no load will not impact the reliability of the series,

although a 1mA minimum load is needed to realize published

specifications.

The HPR10XX Series provides the user low cost without sacrific-

ing reliability. The use of surface mounted devices and advanced

manufacturing technologies make it possible to offer premium

performance and low cost.

FRONT

VIEW

BOTTOM

VIEW

PIN CONNECTIONS

1. +VIN

2. -VIN

4. -VOUT 5. COM*

6. +VOUT

RIGHT

SIDE

VIEW

MECHANICAL

HPR10XX

Product Data Sheet

OBSOLETE PRODUCT

Contact Factory for Replacement Model