NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Ultra-Miniature Process Sealed SMT Toggles

Series G3T

Distinctive Characteristics

Actual Size

Ultra-miniature size allows high density mounting, and extremely light

weight of 0.6 gram makes these switches ideal for handheld equipment.

Tape-reel and stick-tube packaging allow rapid automated

placement of surface mount devices. Tape-reel packaging

meets EIA-481-2 Standard.

Heat resistant resin used for housing, base, and

lever allows vapor phase and infrared convection

reflow soldering.

Combination of design features achieves total seal and

allows automated processing techniques, including flux

cleaning procedures: one-piece bushing and housing,

rubber seals surrounding actuator and base, epoxy at

joint of case and base, and molded-in, epoxy-sealed

terminals.

Award-winning STC contact mechanism with benefits

unavailable in conventional mechanisms: smoother, positive

detent actuation, increased contact stability and unparalleled logic-level

reliability. (Additional STC details in Terms & Acronyms; see Supplement section.)

Gull-wing terminals provide mechanical stability during soldering and simplified solder

joint inspection.

Coplanarity: all considered surfaces must lie between two parallel planes that are a

maximum distance apart of .0059” (0.15mm). (Additional coplanarity details in Terms

and Acronyms in the Supplement section.)