NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Low Profile Process Sealed Tactiles

Series JB

Additional Methods

Additional methods for legends are engraving the lens and laser printing on film inserts.

Maximum depth for engraving is .012” (0.3mm) on the cap lens.

Enamel paint is recommended to fill the engraved area.

LEGENDS

Laser Etch, Screen Print or Pad Print

Epoxy based ink

is recommended.

(8.38) Typ

.330

(20.0) R

.787

(9.9)

.390

Lens

Translucent White or

Colored Diffuser

Frame

Film Insert

Suggested Printable Area for Film Insert

Shaded area is printable area.

Film Insert: Clear Polyester 7 mil maximum thickness

Recommended Methods: Laser Etch on clear lens, Screen Print, or Pad Print on lens; Screen Print on film insert.

Epoxy based ink is recommended.

Shaded areas are printable areas.

Suggested Printable Area for Cap, Lens, or Button

Recommended Methods:

(12.0) Sq

.472

(10.48) Sq

.412

(0.76) Typ

.030

(10.0) Sq

.394

(8.46)

.333

(6.94)

.273

(0.76) Typ

.030

(12.0) Sq

.472

(10.48) Sq

.412

(0.76) Typ

.030

PWR

Laser Etch or Pad Print

Epoxy based ink

is recommended.

Easily create and submit your own legends using our new on-line Legend Maker.

Visit www.nkkswitches.com

For other legend support options, customers may either contact the factory and request the JB Legend Packet,

or utilize the general information and basic specifications presented below.