TLV1504, TLV1508

2.7 V TO 5.5 V, 10-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER,

SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

SLAS251 – DECEMBER 1999

1

POST OFFICE BOX 655303

8

× FIFO

±0.5 LSB Max

SCLK up to 20 MHz

5.5 Vdc

with 500 kHz BW

Sampling Period

1.2 mA at 5.5 V External Ref,

1.6 mA at 2.7 V,

2.1 mA at 5.5 V, Internal Ref)

Power-Down Mode (1

µA Max, Ext Ref),

Auto Power-Down Mode (1

µA, Ext Ref)

(TLV2544, TLV2548)

1

2

3

4

5

6

7

8

9

10

20

19

18

17

16

15

14

13

12

11

SDO

SDI

SCLK

EOC/(INT)

A0

A1

A2

A3

A4

CS

REFP

REFM

FS

PWDN

GND

CSTART

A7

A6

A5

DW OR PW PACKAGE

1

2

3

4

5

6

7

8

16

15

14

13

12

11

10

9

SDO

SDI

SCLK

EOC/(INT)

A0

A1

A2

CS

REFP

REFM

FS

PWDN

GND

CSTART

A3

D OR PW PACKAGE

(TOP VIEW)

(TOP VIEW)

description

The TLV1508 and TLV1504 are a family of high performance, 10-bit, low power, CMOS SAR analog-to-digital

converters (ADC) which operate from a single 2.7 V to 5.5 V power supply. These devices have three digital

inputs and a 3-state output [chip select (CS), serial input-output clock (SCLK), serial data input (SDI) and serial

data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors

(SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a serial data

frame.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog

multiplexer that can select any analog inputs or one of three internal self-test voltages. The sample-and-hold

function is automatically started after the fourth SCLK edge (normal sampling) or can be controlled by a special

pin, CSTART, to extend the sampling period (extended sampling). The normal sampling period can also be

programmed as short (12 SCLKs) or as long (24 SCLKs) to accommodate faster SCLK operation popular

among high-performance signal processors. The TLV1508 and TLV1504 are designed to operate with very low

power consumption. The power-saving feature is further enhanced with software/hardware/auto power down

modes and programmable conversion speeds. The conversion clock (OSC) and reference are built-in. The

converter can use the external SCLK as the source of the conversion clock to achieve higher (2.6

µs when a

20 MHz SCLK is used) conversion speed. Two different internal reference voltages are available (2 V or 4 V).

An optional external reference can also be used to achieve maximum flexibility.

Copyright

© 1999, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.