Rev. 5.28.09_77

iMP Series

8 of 8

Embedded Power for

Business-Critical Continuity

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 760 930 4600

Facsimile: +1 760 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.PowerConversion.com

techsupport.embeddedpower

@emerson.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

©2009 Emerson Electric Co.

EmersonNetworkPower.com

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Precision Cooling

Racks & Integrated Cabinets

Services

Surge Protection

Emerson Network Power.

The global leader in enabling

business-critical continuity.

AC Power

Connectivity

DC Power

x

y

x

x

x

y

y

y

171.45

171.45

177.8

19.05

M4 MOUNTING HOLES (4X)

MARKED AS X

#8-32 MOUNTING HOLES

(4X) MARKED AS Y

M4 MOUNTING HOLES (4X)

IDENTICAL BOTH SIDES

38.10

Normal Air Flow

Reverse Air Flow

8-Inch Case Size: iMP1: 2.5” x 8” x 11” (63.5mm x 203.2mm x 279.4mm)

Weight: iMP1 Case: 5.0 lb. • 210 W Single: 0.6 lb.

• 360 W Single: 1.0 lb. • 750 W Single: 1.6 lb.

• 144 W Dual: 0.6 lb.

Notes

1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs (0.67 N-m).

2. Control connectors: (J1) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110

crimp contacts (Molex C - Grid III Series). Connector kit includes mating connector and 10 pins, Astec part #70-841-004. (J2)

10 position housing (Landwin 2051P1000T). Mates with housing 2050S1000 (Landwin) with 2053T011P (Landwin) pins or JST

PHDR-IOVS Housing and JST SPHD-002T-PO.5 pins.

3. Chassis material: aluminum with chemical film coating (conductive).

4. All dimensions are in millimeters and inches, and are typical.

5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8 mm). Max.

torque: 5 in-lbs. (0.57 N-m).

6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10 in-lbs. (1.13 N-m).

Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs. (0.57 N-m).

i

MP Series

i

MP1 (1200/1500 Watts Max)