| 数据搜索系统,热门电子元器件搜索 |
|
TVP6000CPFP 数据表(PDF) 21 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TVP6000CPFP 数据表(HTML) 21 Page - Texas Instruments |
|
21 / 57 page ![]() 2–9 –30 –40 –50 –60 0 0.5 1 1.5 2 2.5 3 –20 –10 f – Frequency – MHz 0 3.5 4 4.5 5 NTSC_SQP PAL_SQP PAL_CCIR/NTSC_CCIR Figure 2–8. Chroma Path Frequency Response 2.6 Closed Caption The TVP6000 can be programmed to encode closed caption data and extended data in the selected line. The closed caption data are sent to the TVP6000 through the I2C interface. The data stream consists of a seven-bit US-ASCII code and one odd parity bit as shown below. MSB US-ASCII LSB odd-parity bit6 bit5 bit4 bit3 bit2 bit1 bit0 Closed caption data format The standard service encodes closed caption only in the odd field, while the extended service encodes closed caption in both fields. L21ENA, when set to 1, enables closed caption encoding in the odd field and L21ENB, when set to 1 enables closed caption encoding in the even field. The scan line where closed caption is to be encoded is programmable through the SLINE register at subaddress 6B. Four closed caption data registers contain the closed caption data to be encoded. Registers LINE21_O0 and LINE21_O1 contain the first byte and the second byte of the close caption data to be encoded in the odd field. Registers LINE21_E0 and LINE21_E1 contain the first byte and the second byte of the closed caption data to be encoded in the even field. Immediately after the closed caption data is written to the closed caption data registers either for the odd field or even field, the corresponding closed caption status bit, CCE or CCO in the STATUS register at subaddress 02, is reset to 0 to indicate the closed caption data is available in the closed caption data registers and yet to be encoded. Immediately after the closed caption is encoded, the CCE or CCO bit is set to 1 to indicate the closed caption data has been encoded and is ready to accept new data. The null character is automatically inserted if the closed caption data is not written to the closed caption data registers in time for encoding. The run-in clock frequency is 503496.5 Hz ( 32 × fline of NTSC ). The closed caption data is encoded in the format of non-return to zero (NRZ). Additionally, the data translates to the IRE scale in the following manner: 0= 0 IRE; 1 = 50 IRE. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |