●

17HE Series

●

High-density D-sub connector compatible to MIL-C-24308. It is called “high-density” because 9-con-

tacts shell contains 15 contacts.

●

Receptacles (socket contact) come in three types : conventional “L-shaped DIP type” , and space-sav-

ing “L-shaped DIP type” and “SMT type” .

●

The space-saving types are lower by 2mm in mounting height than the conventional type, and best suited

to high-density mounting because the area (front and back) they occupy on PCB is smaller by 50% or 70%

in the case of L-shaped DIP- or SMT-type, respectively, than conventional ones.

●

Plug (pin contact) consists of crimp-type press-contacts, and is compatible with three types of cables

(AWG 30, 28 and 26) and existing 17JE type hood.

Use connector on a panel fixed on PCB by fastening it on the panel with small screws or engaging block

MIL-C-24308-Compatible High-Density Crimp Type

FEATURE

SPECIFICATION

Voltage Rating

250V AC (r.m.s.)

Current Rating

1A/Contact

Dielectric Withstanding Voltage

1,000V AC (r.m.s.)/for 1 minute

Insulation Resistance

5,000MΩ min. at 500V DC

Contact Resistance

20mΩ max.

Wire Accommodation

AWG30, 28, 26, 24

InsulatorJacket Diam.φ0.8 to φ1.21

MATERIAL/FINISH

P/N

MATERIAL/FINISH

Block

PBT resin/(UL94V-0)/color black

PPS resin/(UL94V-0)/color black

Shell

Brass/Nickel Plating

Contact

Copper alloy/Mating area : Gold over Nickel Plating,

Tail area : Sn-Ag over Nickel Plating

Hood

ABS resin/Nickel Plating

Cautions about Use

1

RoHS Compliant

Ｌ

17HE