V7.1 1/08

14

divisions.

5. Diagram J-1 shows that cursor 1 is used for the temperature readings and the lower

region shows the Relative Humidity records. In Diagram J-2 the divisions are set to 130.

6. Diagram I is a Temperature example using Diagrams I-1 and I-2 as data sources.

Diagram J is a Temperature and Humidity example using Diagrams J-1 and J-2 as data

sources.

7. The right side of Diagram I indicates Maximum, Minimum, Mean and Standard Deviation

(Std. Dev) values for Whole Range (upper part) and Cursor Range (lower part).

Maximum: The highest reading in Whole Range or Cursor Range.

Minimum: The lowest reading.

Mean: The Average reading.

Std. Dev.: A calculation of the deviation between each reading and the Mean value (See

Diagram I-1 ).

Print Graph

Press the PRINT icon to print the graph.