HS-3000 datasheet(33/46 Pages) BOSER

33 / 46 page

Chapter 4

AMI BIOS Setup

The HS-3200/4M uses Award ISA BIOS for the system configuration.

The AMI BIOS setup program is designed to provide the maximum

flexibility in configuring the system by offering various options that

could be selected for end-user requirements. This chapter is written to

assist you in the proper usage of these features.

4.1 Starting Setup

The Award BIOS is immediately activated when you first power on the

computer. The BIOS reads the system information contained in the

CMOS and begins the process of checking out the system and

configuring it. When it finishes, the BIOS will seek an operating system

on one of the disks and then launch and turn control over to the

operating system.

While the BIOS is in control, the Setup program can be activated in one

of two ways:

By pressing <Del> immediately after switching the system on,

By pressing the <Del> key when the following message

appears briefly at the bottom of the screen during the POST

(Power On Self Test).

Press DEL to enter SETUP.

If the message disappears before you respond and you still wish to

enter Setup, restart the system to try again by turning it OFF then ON or

pressing the "RESET" button on the system case. You may also restart

by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do

not press the keys at the correct time and the system does not boot, an

error message will be displayed and you will again be asked to...

PRESS F1 TO CONTINUE, DEL TO ENTER SETUP

HS-3000 数据表(PDF) 33 Page - BOSER Technology Co., Ltd