| 数据搜索系统,热门电子元器件搜索 |
|
CDK2000 数据表(PDF) 14 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CDK2000 数据表(HTML) 14 Page - Cirrus Logic |
|
14 / 26 page ![]() CS2300-OTP 14 DS844F1 Ratio modifiers which would produce an overflow or truncation of REFF should not be used. In all cases, the maximum and minimum allowable values for REFF are dictated by the frequency limits for both the input and output clocks as shown in the “AC Electrical Characteristics” on page 7. Selection of the user defined ratio from the four stored ratios is made by using the M[1:0] pins. 5.4.4 Ratio Configuration Summary The RUD is the user defined ratio for which up to four different values (Ratio0-3) can be stored in the one time programmable memory. The M[1:0] pins then select the user defined ratio to be used as well as the modal configuration set. The resolution/format for the RUD is selectable. R-Mod is applied accordingly. The user defined ratio, ratio modifier, and automatic ratio modifier make up the effective ratio REFF, the final calculation used to determine the output to input clock ratio. The conceptual diagram in Figure 10 summarizes the features involved in the calculation of the ratio values used to generate the fractional-N value which controls the Frequency Synthesizer. The subscript ‘4’ indicates the modal parameters. Figure 10. Ratio Feature Summary Referenced Control Parameter Definition M[1:0] pins............................. “M1 and M0 Mode Pin Functionality” on page 16 Referenced Control Parameter Definition Ratio 0-3................................“Ratio 0 - 3” on page 20 M[1:0] pins............................. “M1 and M0 Mode Pin Functionality” on page 16 LFRatioCfg ............................ “Low-Frequency Ratio Configuration (LFRatioCfg)” on page 20 RModSel[1:0] ........................ “R-Mod Selection (RModSel[1:0])” section on page 19 Effective Ratio REFF Ratio Format Frequency Reference Clock (CLK_IN) PLL Output Frequency Synthesizer Digital PLL & Fractional N Logic Ratio 0 Ratio 1 Ratio 2 Ratio 3 12.20 20.12 M[1:0] pins LFRatioCfg RModSel[1:0]4 Ratio Modifier LCO Dynamic Ratio, ‘N’ User Defined Ratio RUD M2 pin |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |