CS5510/11/12/13

DS337F4

21

3. PIN DESCRIPTIONS

Control Pins and Serial Data I/O

CS - Chip Select, Pin 4

CS is a dual function pin, which determines the state of SDO, as well as the digital logic-low output

level. When CS is low, SDO will be active. When high, the SDO pin will output a high-impedance state.

The logic-low level of SDO will match the active-low voltage on CS.

SDO - Serial Data Output, Pin 8

SDO is the serial data output. It will output a high-impedance state if CS = 1. The logic-low level of SDO

will match the active-low voltage on CS.

SCLK - Serial Clock Input, Pin 5

SCLK is the serial bit-clock which controls the shifting of data from the ADCs. This input goes through a

Schmitt trigger to allow for slow rise and fall time signals. If held high, the device will enter sleep mode.

In the CS5510/12, this input is also used as a master clock source which determines conversion speeds

and throughput. In the CS5511/13, SCLK is only used to read the conversion data and put the part in

sleep mode.

Measurement and Reference Inputs

AIN+, AIN- - Differential Analog Input, Pins 2, 3

Differential input pins into the device

VREF - Voltage Reference Input, Pin 1

Input Voltage which establishes the voltage reference, with respect to V-, for the on-chip modulator

Power Supply Connections

V+ - Positive Power, Pin 6

Positive supply voltage

V- - Negative Supply, Pin 7

Negative supply voltage

VREF

AIN+

AIN-

CS

SDO

V-

V+

SCLK

1

2

3

4

8

7

6

5