• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAMSS0044

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Gain

—

dB

11

12.5

13.5

Gain Flatness

—

dB

—

0.8

1.3

Noise Figure

—

dB

—

3.7

5

Input Return Loss

—

dB

—

15

—

Output Return Loss

—

dB

—

15

—

Output IP2

400 MHz, +4 dBm output

dBm

—

75

—

Output IP3

Two tones at 397 & 403 MHz, +8 dBm output/tone

dBm

—

42

—

Composite Triple Beat, CTB

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-75

-65

-70

—

Composite Second Order, CSO

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-85

-75

-80

—

Cross modulation

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-75

-65

—

—

P1dB

400 MHz

dBm

—

24

—

+5 Volts

mA

—

225

280

Circuit with M/A-COM Balun MABACT0069

Parameter

Absolute Maximum

Input Power

+20 dBm

Operating Voltage

+10 volts

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

150°C

5. Exceeding any one or combination of these limits may cause

permanent damage to this device.

6. M/A-COM does not recommend sustained operation near

these survivability limits.

Typical thermal resistance (Өjc) = 39° C/W.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.