• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

SPDT High Isolation Terminated Switch

0.01 - 3.0 GHz

Rev. V6

MASWSS0024

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications

Parameter

Test Conditions

Units

Min

Typ

Max

Insertion Loss

0.01 - 0.5 GHz

0.5 - 1.0 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

dB

—

—

—

—

0.5

0.6

0.7

0.75

—

0.7

0.8

0.9

Isolation

0.01 - 0.5 GHz

0.5 - 1.0 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

dB

—

51

48

43

59

54

52

48

—

—

—

—

Return Loss

0.01 - 0.5 GHz

6

0.5 - 1.0 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

dB

—

—

—

—

20

20

20

20

—

—

—

—

dBm

—

83

—

dBm

—

43

—

Trise, Tfall

10% to 90% RF & 90% to 10% RF

nS

—

24

—

Ton, Toff

nS

—

15

—

Transients

mV

—

12

—

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Truth Table

V1

V2

RFC-RF1

RFC-RF2

0

1

Off

On

1

0

On

Off

Logic Level

Voltage Level

7

0 ± 0.2V

5. External DC blocking capacitors are required on all RF ports (47 pF capacitors are recommended). Use larger value capacitors for lower

frequency operation (e.g. use 10,000 pF capacitors to optimize insertion and return loss at frequencies below 50 MHz).

6. Terminated return loss is governed by blocking capacitors internal to the device; see applications plot.