• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

GaAs SPDT 2.8 V High Power Switch

DC - 3.0 GHz

Rev. V2

MASWSS0029

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

5

dB

dB

dB

—

—

—

0.40

0.50

0.60

0.65

—

—

Isolation

dB

dB

dB

23

—

—

24.5

18.5

13

—

—

—

Return Loss

dB

dB

—

—

20

16

—

—

IP3

Two Tone, +29 dBm Total Pin, 1 MHz Spacing

dBm

—

60

—

P0.1dB

dBm

—

34

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

nS

—

200

—

Ton, Toff

50% control to 90% RF,

and 50% control to 10% RF

nS

—

250

—

Transients

In Band

mV

—

14

—

Gate Leakage

uA

—

—

60

Frequency

DC – 1 GHz

1 – 2 GHz

2 - 3 GHz

DC – 1 GHz

1 – 2 GHz

2 - 3 GHz

DC – 2 GHz

2 - 3 GHz

0.05 - 3 GHz

—

—

—

—

—

4. External DC blocking capacitors are required on all RF ports.

5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3.0 GHz.

V1

V2

ANT– RF1

ANT - RF2

+2.8 V

0 V

On

Off

0 V

+2.8 V

Off

On

Truth Table

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

SOT-26 Plastic Package

†

† Meets JEDEC moisture sensitivity level 1 requirements