• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

SPST High Isolation CATV Switch

5 - 1000 MHz

Rev. V1

MASWSS0067

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

3

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

5 - 50 MHz

50 - 1000 MHz

dB

dB

—

—

0.45

0.65

—

0.9

Isolation

5 - 50 MHz

50 - 1000 MHz

dB

dB

—

50

70

53

—

—

Return Loss (On)

Return Loss (Off)

(RF1 only)

5 – 50 MHz

50 – 1000 MHz

5 – 50 MHz

50 – 1000 MHz

dB

dB

dB

dB

—

—

—

—

30

16

30

18

—

—

—

—

IP3

Two Tone, +10 dBm / tone, 6 MHz Spacing, > 50 MHz

dBm

—

52

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

nS

—

20

—

Ton, Toff

50% control to 90% RF, and 50% control to 10% RF

nS

—

40

—

Transients

In Band

mV

—

30

—

Control Current

|Vc| = 5V

µA

—

10

25

V1

V2

RF1—RF2

1

0

On

0

1

Off

Truth Table

5

3. External DC blocking capacitors are required on all RF ports.

Parameter

Absolute Maximum

Max Input Power

(5 - 1000 MHz, 2.5V Control)

+32 dBm

Operating Voltage

+8.5 volts

Operating Temperature

-40

Storage Temperature

-65

Absolute Maximum Ratings

4

4. Exceeding any one or combination of these limits may cause

permanent damage to this device.

Qualification

Qualified to M/A-COM Specification Rel 201, Proc-

ess Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium arsenide integrated circuits are sensitive to

electrostatic discharge (ESD) and can be damaged

by static electricity.

Use proper ESD control pre-

cautions when handling these devices.

5. 0 = 0 V + 0.2 V; 1 = +2.5 V to +5.0 V.