| 数据搜索系统,热门电子元器件搜索 |
|
MCP4641-103E/MF 数据表(PDF) 45 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP4641-103E/MF 数据表(HTML) 45 Page - Microchip Technology |
|
45 / 92 page ![]() © 2008 Microchip Technology Inc. DS22107A-page 45 MCP454X/456X/464X/466X 5.4 Shutdown Shutdown is used to minimize the device’s current consumption. The MCP4XXX achieves this through the Terminal Control Register (TCON). 5.4.1 TERMINAL CONTROL REGISTER (TCON) The Terminal Control (TCON) register is a volatile register used to configure the connection of each resistor network terminal pin (A, B, and W) to the Resistor Network. This bits are described in Register 4-2. When the RxHW bit is a “0”, the selected resistor net- work is forced into the following state: • The PxA terminal is disconnected • The PxW terminal is simultaneously connected to the PxB terminal (see Figure 5-2) • The Serial Interface is NOT disabled, and all Serial Interface activity is executed • Any EEPROM write cycles are completed Alternate low power configurations may be achieved with the RxA, RxW, and RxB bits. FIGURE 5-2: Resistor Network Shutdown Configuration. 5.4.2 INTERACTION OF RxHW BIT AND RxA, RxW, AND RxB BITS (TCON REGISTER) Using the TCON bits allows each resistor network (Pot 0 and Pot 1) to be individually “shutdown”. The state of the RxHW bit does NOT corrupt the other bit values in the TCON register nor the value of the Volatile Wiper Registers. When the Shutdown mode is exited (RxHW changes state from “0” to “1”): • The device returns to the Wiper setting specified by the Volatile Wiper value • The RxA, RxB, and RxW bits return to controlling the terminal connection state of that resistor net- work Note 1: The RxHW bits are identical to the RxHW bits of the MCP41XX/42XX devices. The MCP42XX devices also have a SHDN pin which forces the resistor network into the same state as that resistor networks RxHW bit. 2: When RxHW = “0”, the state of the TCON register RxA, RxW, and RxB bits is over- ridden (ignored). When the state of the RxHW bit returns to “1”, the TCON register RxA, RxW, and RxB bits return to controlling the terminal connection state. In other words, the RxHW bit does not corrupt the state of the RxA, RxW, and RxB bits. A B W |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |