Rev. 11.2.09_69

NFS110 Series

3 of 5

Embedded Power for

Business-Critical Continuity

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

Notes

1 Convection cooled, 80 W maximum.

2 Peak outputs lasting less than 60 seconds with duty cycle less than 10%. Total

peak power must not exceed 110 W.

3 Forced air, 20 CFM at 1 atmosphere, 110 W maximum.

4 Figure is peak-to-peak. Output ripple is measured across a 50 MHz bandwidth

using a 12 inch twisted pair terminated with a 47 µF capacitor.

5 Total regulation is defined as the static output regulation at 25 °C, including

initial tolerance, line voltage within stated limits and output voltages adjusted

to their factory settings.

6 To achieve stated regulation on the 24 V output on the NFS110-7602PJ, the

The +24 V output will maintain ±5.0% regulation under the following

7 Single output models have floating outputs which may be referenced as

either positive or negative. Higher voltage supplies may be adjusted over a

wide output voltage range, as long as the total output power does not exceed

80 Watts (natural convection) or 110 Watts (forced air).

8 Power fail detect not available on single output models.

9 Derating curve is application specific for ambient temperatures >50 °C,

for optimum reliability no part of the heatsink should exceed 90 ºC and no

semiconductor case temperature should exceed 100 ºC.

10 Caution: Allow a minimum of 1 second after disconnecting the power when

making thermal measurements.

11 Three orthogonal axes, random vibration, 10 minute test for each axis.

12 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

13 Recommend a minimum load of 11 W to achieve the design MTBF. See the

derating curve on page 4.

14 Power failure detec is optional by including the suffix “P” to the model

number.

15 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

16 NOTICE: Some models do not support all options. Please contact your

local Emerson Network Power representative or use the on-line model

number search tool at http://www.PowerConversion.com to find a suitable

alternative.

Ordering Information

Output

Voltage

Output Currents

Total

+5.1 V

8 A

20 A

10 A

50 mV

± 2.0%

+12 V

4.5 A

9 A

5 A

120 mV

± 3.0%

–12 V

0.5 A

1.5 A

1 A

120 mV

± 3.0%

–5 V

0.5 A

1.5 A

1 A

50 mV

± 3.0%

+5.1 V (IA)

8 A

20 A

10 A

50 mV

± 2.0%

3.5 A

4.5 A

4.5 A

240 mV

+10/–5.0%

+12 V

4.5 A

9 A

5 A

120 mV

± 3.0%

–12 V

0.5 A

1.5 A

1 A

120 mV

± 3.0%

+5.1 V

8 A

20 A

10 A

50 mV

± 2.0%

15 V

4 A

7.5 A

5 A

150 mV

± 4.0%

-15 V

0.5 A

1.5 A

1 A

150 mV

± 3.0%

-5 V

0.5 A

1.5 A

1 A

50 mV

± 3.0%

12 V

7 A

9 A

9 A

120 mV

± 2.0%

15 V

5 A

7.3 A

7.3 A

150 mV

± 2.0%

24 V

3.5 A

4.5 A

4.5 A

240 mV

± 2.0%

Transient Response

NFS110-7601PJ

+5.1 V (7.5 A to 10 A)

+12 V (2.5 A to 5 A)

-12 V (0.5 A to 1 A)

-5 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

100 mV peak, 0.5 ms recovery

100 mV peak, 0.5 ms recovery

NFS110-7602PJ

+5.1 V (7.5 A to 10 A)

+24 V (1.5 A to 3 A)

+12 V (2.5 A to 5 A)

-12 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

300 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

100 mV peak, 0.5 ms recovery

NFS110-7604PJ

+5.1 V (7.5 A to 10 A)

+15 V (2.5 A to 5 A)

-15 V (0.5 A to 1 A)

-5 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

100 mV peak, 0.5 ms recovery

100 mV peak, 0.5 ms recovery

NFS110-7605J

+5.1 V (10 A to 20 A)

250 mV peak, 1 ms recovery

NFS110-7612J:

+12 V (4.5 A to 9 A)

360 mV peak, 1 ms recovery

NFS110-7615J

+15 V (3.65 A to 7.3 A)

450 mV peak, 1 ms recovery

NFS110-7624J

+24 V (2.25 A to 4.5 A)

720 mV peak, 1 ms recovery