LOW POWER LOW OFFSET VOLTAGE SINGLE COMPARATOR

AS331

Data Sheet

3

Oct 2009 Rev. 1. 3

BCD Semiconductor Manufacturing Limited

Package

Temperature

Range

Part Number

Marking ID

Packing

Type

Lead Free

Green

Lead Free

Green

SOT-23-5

AS331KTR-E1

AS331KTR-G1

EEA

GEA

Tape & Reel

Circuit Type

Package

K: SOT-23-5

E1: Lead Free

AS331

-

TR: Tape and Reel

Ordering Information

Parameter

Symbol

Value

Unit

Supply Voltage

40

V

Differential Input Voltage

40

V

Input Voltage

-0.3 to 40

V

50

mA

Output Short-circuit Current to Ground

Continuous

620

mW

Operating Junction Temperature

150

Storage Temperature

-65 to 150

Lead Temperature (Soldering, 10sec)

260

Absolute Maximum Ratings (Note 1)

Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the

device. These are stress ratings only, and functional operation of the device at these or any other conditions

beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Max-

imum Ratings" for extended periods may affect device reliability.

Note 2: This input current will only exist when the voltage at any of the input leads is driven negative. It is due to

the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode

clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This

transistor action can cause the output voltages of the comparators to go to the V+ voltage level (or to ground for a

large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output

states will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3V (at

G1: Green

BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Products with

"G1" suffix are available in green package.