PD064VT4

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.

Page:2

Revision History

Rev. Eng.

Issued

Date Revised

Contents

1.0

Mar 11,2004

New

1.1

Mar 12,2004

Modify

Page 3. Mechanical Specifications (Weight from 270g to 340g )

Page 4. Mechanical Drawing of TFT-LCD Module

(Module with back cover)

1.2

Nov 01,2004

Modify

Page7: 7-2)Recommended Operation Condition for backlight

Kick off voltage(25℃) from 790 to 970

Add:

Kick-off voltage(0℃)

Page22: Packing drawing

1.3

Jan 11,2005

Remove Page 20: Indication of Lot Number Label

Add Page 20: Reliability

(Note the protective film must be remove before temperature test)

1.4

Dec 05,2005

Page4

Mechanical Drawing of TFT-LCD Module

1.Add screw torsion SPEC.(1.5kgf-cm , Max)

2.Modify switch1 Pin NO. from 9 pins to 8 Pins

3.Modify switch1 Pin NO. from 3 pins to 2 Pins

Page14

7-8)Control Board Dip switch Format

SW1-2 (Rework): form Default(ON) modify to Default(OFF)

SW1-3 (Rework) :form Default(OFF) modify to Default(ON)

SW1-4 (Rework): form Default(OFF) modify to Default(ON)

1.5

蔡弘毅

Apr 28 2006,

Page8: 7-4)Input/ Output signal timing chart

Hsync (Back-porch) Typ. From 48tc modify to 46tc

Hsync(Front-porch) Typ. From 16tc modify to 18tc

Hsync(Hpw+Hbp) Typ. From

144 tc modify to 142 tc

Page14

7-8)Control Board Dip switch Format

SW1-2 (Rework): form Default(OFF) modify to Default(ON)

SW1-3 (Rework) :form Default(ON) modify to Default(OFF)

SW1-4 (Rework): form Default(ON) modify to Default(OFF)

1.6

蔡弘毅

May 23, 2006

Page 16

9. Optical Characteristic

9-1) Specification : lamp life time

from 20,000(typ)hrs modify to 50,000 (Min)

8.0

黃秀晶

July 11, 2007

Remove “Revision History” from Page23 to Page2

Modify Page2 Revision from 1.7 to 8.0