PD064VT5

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be

distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,

Ltd.

Page:20

11. Reliability Test

No

Test Item

Test Condition

1

High Temperature Storage Test

Ta = +80

, 240 hrs

2

Low Temperature Storage Test

Ta = -30

, 240 hrs

3

High Temperature Operation Test

Ta = +70

, 240 hrs

4

Low Temperature Operation Test

Ta = -20

, 240 hrs

5 High Temperature & High Humidity

Operation Test

Ta = +60

, 90%RH, 240 hrs

6

Thermal Cycling Test

(non-operating)

-25

+70 , 200 Cycles

30 min

30 min

7

Shock Test

(non-operating)

Gravity :490m/s

Direction: X, Y, Z

Pulse Width :11ms,half sine wave

8

Vibration Test

(non-operating)

58-500 H/ / Gravity :9.8m/s

Sweep time: 11 minutes

Test period: 3 hrs for each direction of X, Y, Z

9

Electrostatic Discharge Test

(non-operating)

150pF, 330

Air : 15KV ; Contact : 8KV

10 times/point , 9 points/panel face

Ta: ambient temperature

[Criteria]

1. Main LCD should normally work under the normally condition no defect of function,

screen quality and appearance (including : mura ,line defect ,no image).

2. After the temperature and humidity test, the luminance and CR (Contrast ratio) ,should not

be lower than minimum of specification.

3. After the vibration and shock test , can’t be find chip broken.