(H Series)

Parameter

Symbol

Part No. (LTL)

Min.

Typ.

Max.

Unit

Test Condition

2R3JDDNN

3.8

7.2

2R3JRDNN

3.8

8.0

2R3JEDNN

3.8

10.6

2R3JFDNN

3.8

10.6

2R3JYDNN

3.8

10.6

2R3JSDNN

3.8

10.6

Luminous

Intensity

Iv

2R3JGDNN

3.8

10.6

mcd

Note 1

Note 2

Viewing Angle

2

θ1/2

45

deg

Note 3 (Fig.5)

2R3JDDNN

650

2R3JRDNN

639

2R3JEDNN

632

2R3JFDNN

611

2R3JYDNN

595

2R3JSDNN

588

Peak Emission

Wavelength

λP

2R3JGDNN

575

nm

Measurement

@ peak (Fig.1)

2R3JDDNN

639

2R3JRDNN

632

2R3JEDNN

624

2R3JFDNN

605

2R3JYDNN

592

2R3JSDNN

587

Dominant

Wavelength

λd

2R3JGDNN

572

nm

Note 5

2R3JDDNN

20

2R3JRDNN

20

2R3JEDNN

20

2R3JFDNN

17

2R3JYDNN

15

2R3JSDNN

15

Spectral Line

Half-Width

∆λ

2R3JGDNN

15

nm

2R3JDDNN

1.8

2.4

2R3JRDNN

1.8

2.3

2R3JEDNN

1.8

2.4

2R3JFDNN

1.8

2.4

2R3JYDNN

1.8

2.4

2R3JSDNN

1.8

2.4

Forward Voltage

2R3JGDNN

1.8

2.4

V

Reverse Current

100

µA

Capacitance

C

40

pF

NOTES:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. Luminous intensity rank classified products support two ranks.

3.

θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

4. Iv classification code is marked on each packing bag.

5. The dominant wavelength,

λd is derived from the CIE chromaticity diagram and represents the single wavelength which

defines the color of the device.



$

 !"