| 数据搜索系统,热门电子元器件搜索 |
|
LTC4350IGN 数据表(PDF) 3 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LTC4350IGN 数据表(HTML) 3 Page - Linear Technology |
|
3 / 18 page ![]() LTC4350 4350fb elecTrical characTerisTics Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. VCC = 5V unless otherwise noted. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS DC Characteristics VUVTH UV Pin Threshold High Going Threshold Low Going Threshold l l 1.215 1.205 1.244 1.220 1.258 1.237 V V VOVTH OV Pin Threshold High Going Threshold Low Going Threshold l l 1.203 1.180 1.220 1.205 1.250 1.229 V V VTM TIMER Pin Threshold l 1.18 1.22 1.26 V ITM TIMER Pin Current TIMER On, VTIMER = 0V TIMER On, VTIMER = 0V, VOV > VOVTH l l –1.75 –5.30 –2 –6 –2.3 –6.7 µA µA VG GAIN Pin Voltage RGAIN = 25k, (VR+ – VR–) = 100mV l 2.3 2.5 2.7 V VGO GAIN Pin Offset RGAIN = 25k, (VR+ – VR–) = 0mV l 0 0.02 0.20 V VSB(MIN) SB Pin Minimum Voltage 2 8 mV VSB(MAX) SB Pin Maximum Voltage VCC = 3.3V VCC = 12V l l 2.4 5.6 2.7 7.8 2.9 10.5 V V ISB(MAX) SB Pin Maximum Current VSB = 0V l –8 –33 –41 mA RSB SB Pin Resistor Value l 14 20 33 kΩ VE/A2OFF E/A2 Offset VSB – VGAIN l 8 25 50 mV VRSET(MAX) RSET Pin Maximum Voltage VCC = 3.3V, RSET = 100Ω VCC = 12V, RSET = 100Ω l l 0.94 0.94 1 1 1.03 1.03 V V VRSET(MIN) RSET Pin Minimum Voltage VCC = 5V, RSET = 1000Ω VCC = 5V, RSET = 100Ω l l 0.001 0.001 0.5 0.5 V V IRSET(MAX) RSET Pin Maximum Current RSET = 50Ω, VIOUT = 1.1V l 18 20 21 mA VRCTH Reverse Current Threshold VR+ – VR+ l 10 30 40 mV ∆VGATE External N-Channel Gate Drive VGATE – VCC l 10.8 12 12.7 V IGATE GATE Pin Current Gate On, VGATE = 0V l –8 –10 –12 µA VSOL STATUS Pin Output Low IOUT = 3mA l 0.1 0.3 1.2 V Note 2: R+ and R– could be at 17V while VCC = 0V. Note 3: An internal clamp limits the GATE pin to a minimum of 10.8V above VCC. Driving this pin to voltages beyond the clamp may damage the part. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |