202

Sealed Subminiature Basic Switch

D2SW-P

Specifications

■ Characteristics

Note: 1. The data given above are initial values.

2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate.

3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values

apply at the total travel position. Contact opening or closing time is within 1ms.

■ Ratings

Note: The ratings values apply under the following test conditions.

Ambient temperature: 20±2°C

Ambient humidity: 65±5%

Operating frequency: 20 operations/min.

■ Approved Standards

UL Recognized

CSA Certified

■ Contact Specifications

Note: Minimum applicable loads are indicated by N standard refer-

ence values. This value represents the failure rate at a 60%

(λ

The equation

λ

rate of 1/2,000,000 operations can be expected at a reliability

level of 60%

■ Contact Form

Note: Lead wire colors are indicated in parentheses.

Item

Model

D2SW-P2

D2SW-P01

Operating speed

0.1 mm to 500 mm/s (pin plunger models)

Operating frequency

Mechanical: 120 operations/min max.

Electrical:

20 operations/min max.

Insulation resistance

100 M

Ω min. (at 500 VDC)

Contact resistance

Terminal models: 50 m

Ω max.

Molded lead wire models: 100 m

Ω max.

Terminal models: 100 m

Ω max.

Molded lead wire models: 150 m

Ω max.

Dielectric strength (see note 2)

1,000 VAC, 50/60 Hz for 1 min. between

terminals of the same polarities

600 VAC, 50/60 Hz for 1 min. between

terminals of the same polarities

1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between

each terminal and non-current-carrying metal parts

Vibration resistance (see note 3)

Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance (see note 3)

Degree of protection

IEC IP67 (excluding the terminals on terminal models)

Degree of protection against electric shock Class I

Proof tracking index (PTI)

175

Ambient operating temperature

-20

°C to 70°C (at 60% RH max.) with no icing

Ambient operating humidity

85% max. (for 5

°C to 35°C)

Life expectancy

Mechanical: 1,000,000 operations min.

(60 operations/min.)

Electrical: 50,000 operations min.

(20 operations/min.)

Mechanical: 1,000,000 operations min.

(60 operations/min.)

Electrical: 200,000 operations min.

(20 operations/min.)

Weight

Approx. 2 g (pin plunger models with terminals)

Model

Rated voltage

Resistive load

D2SW-P2

30 VDC

2 A

250 VAC

D2SW-P01

30 VDC

0.1 A

125 VAC

Rated voltage

D2SW-P2

D2SW-P01

125 VAC

250 VAC

—

2 A

0.1 A

—

30 VDC

2 A

0.1 A

Item

D2SW-P2

D2SW-P01

Specification

Rivet

Crossbar

Material

Silver alloy

Gold alloy

Gap (standard value)

0.5 mm

Minimum applicable load

(see note)

160 mA at 5 VDC 1 mA at 5 VDC

SPDT

SPST-NC

(wire models, only)

SPST-NO

(wire models, only)

COM

NO

NC

(Black) (Blue) (Red)

COM

NC

(Black)

(Red)

COM

NO

(Black) (Blue)