For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

6

6 - 28

HMC765LP6CE

v02.0110

FRACTIONAL-N SYNTHESIZER WITH

INTEGRATED VCO, 7.8 - 8.8 GHz

Evaluation PCB

The circuit board used in the application should use RF circuit design techniques. Signal lines should have

50 Ohm impedance while the package ground leads and exposed paddle should be connected directly

to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the

top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.