DATA LINE TRANSIENT

SUPPRESSOR

S C O T TS DALE DIVISION

DLTS-5 thru DLTS-30

DESCRIPTION

APPEARANCE

This series of Transient Voltage Suppressor (TVS) devices is packaged in

a ceramic, dual-in-line, hermetically sealed package. These components

offer 15 protective devices, unidirectional or bidirectional, common buss

connections, per package. The dual-in-line is designed specifically for data

line protection, at the PC board level. TTL and MOS voltage levels are

available for protection of input/output data circuits. Microsemi also offers

numerous other TVS products to meet higher and lower power demands

and special applications.

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

Multiple TVS array

•

Ceramic dual-in-line, 16 PIN hermetic package

•

Common-buss configuration

•

Optional 100% screening for avionics grade is

available by adding MA prefix to part number for

added 100% temperature cycle -55

(10X) as well as surge (3X) and 24 hours HTRB

unidirectional or both directions for bidirectional)

•

Options for screening in accordance with MIL-PRF-

19500 for JAN, JANTX, JANTXV, and JANS are

also available by adding MQ, MX, MV, or MSP

prefixes respectively to part numbers.

•

Protects up to 15 lines

•

Provides electrically isolated protection

•

Unidirectional or Bidirectional selections

•

Voltage range of 5 V to 30 V available

•

Protects sensitive components such as IC’s,

CMOS, Bipolar, BiCMOS, ECL, DTL, T

2

L, etc.

•

Protection from switching transients & induced RF

•

Compliant to IEC61000-4-2 and IEC61000-4-4 for

ESD and EFT protection respectively

•

Inherently radiation hard as described in Microsemi

MicroNote 050

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

•

500 Watts Peak Pulse Power/Position @ 8x20

μs

(see figure 1 and 2)

•

unidirectional and < 5 ns for bidirectional

•

Operating and Storage temperatures: -55

+150

•

Forward Surge Rating: 10 Amps, 1/120 sec. @ 25

(unidirectional)

•

Repetition Rate (duty cycle): .01%

•

CASE: Ceramic, 16 pin dual-in-line (.300” row

spacing)

•

POLARITY: Pin No. 1 marked with a flag on lead

and a dot on top of package.

•

MARKING: Body marked with part number

•

WEIGHT: 3.5 grams (approximate)

Microsemi

Scottsdale Division

Page 1

Copyright

© 2009

1-08-09 REV B, SA4-35

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503