TWO-LEVEL CURRENT-LIMIT CIRCUIT

OUT

IN

GND

FAULT

ILIM

EN

ControlSignal

Input

Fault Signal

PowerPad

Output

CurrentLimit

ControlSignal

0.1 F

m

R

100k

FAULT

W

R1

210kW

R2

22.1kW

Q1

2N7002

TPS2552

TPS2553, TPS2552-1, TPS2553-1

Some applications require different current-limit thresholds depending on external system conditions. Figure 27

shows an implementation for an externally controlled, two-level current-limit circuit. The current-limit threshold is

set by the total resistance from ILIM to GND (see the Programming the Current-Limit Threshold section). A

logic-level input enables/disables MOSFET Q1 and changes the current-limit threshold by modifying the total

resistance from ILIM to GND. Additional MOSFET/resistor combinations can be used in parallel to Q1/R2 to

increase the number of additional current-limit levels.

NOTE:

ILIM should never be driven directly with an external signal.

Figure 27. Two-Level Current-Limit Circuit

Copyright © 2008–2009, Texas Instruments Incorporated

Submit Documentation Feedback

21

Product Folder Link(s): TPS2552 TPS2553 TPS2552-1 TPS2553-1