SWR200

SWR200DS

3

P r o d u c t I n n o v a t i o n F r o m

NOTES:

* Same as C Models.

1. Using the box method, the specified value is the maximum deviation from the output voltage at

+25°C over the specified operating temperature range.

2. The specified values are unloaded.

3. Pin 8 is internally connected to Pin 7 and can be used as Ref. GND.

4. The frequency range can be extended to any desired lower value by using 2 external AGC capacitors

(see AN-3).

5. The increase in distrotion at lower frequencies can be eliminated by using external AGC capacitors

(see AN-3).

2. TYPICAL PERFORMANCE GRAPHS

SWR200C

% ∆ FREQ. vs. TEMP.

SWR200M

SWR200C

SWR200M

DISTORTION VS. TEMP

DISTORTION vs. FREQUENCY

Frequency (Hz)

NORMALIZED DISTORTION vs. C2/C1

C2/C1

POWER SUPPLY CURRENT vs. TEMP.

CASE TEMP. RISE ABOVE AMBIENT

vs. OUTPUT CURRENT

Output Current (mA)

JUNCTION TEMP. RISE

ABOVE CASE TEMP. vs

OUTPUT CURRENT

Output Current (mA)

% ∆ FREQ. vs. TEMP.

0

-20

15.6

20

-15.6

-50

50

35

0

-35