161

RoHS Compliant, ELV Compliant

10

Lead material

AHRF050 to AHRF200

Soldering characteristics

Solderability per ANSI/J-STD 002 Category 3

Solder heat withstand

per IEC 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ± 5°C

Insulating material

Cured, flame-retardant epoxy polymer; meets UL 94V-0 requirements

Operation temperature

-40°C~125°C

Note: See PS400 for other physical characteristics.

Devices are not designed to be placed through a reflow process.

Test

Conditions

Resistance Change

Passive aging

70°C, 1000 hours

±5%

85°C, 1000 hours

±5%

Humidity aging

85°C, 85% RH, 1000 hours

±5%

Thermal shock

125°C, -40°C (10 times)

±5%

Solvent resistance

MIL-STD-202, Method 215F

No change

Note: See PS400 for other environmental specifications.

AHRF

Physical Characteristics

Environmental Specifications

Lead material

AHEF1000

Soldering characteristics

Solderability per ANSI/J-STD 002 Category 3

Solder heat withstand

per IEC 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ± 5°C

Insulating material

Cured, flame-retardant epoxy polymer; meets UL 94V-0 requirements

Operation temperature

-40°C~125°C

Note: See PS400 for other physical characteristics.

Devices are not designed to be placed through a reflow process.

Test

Conditions

Resistance Change

Passive aging

70°C, 1000 hours

±5%

85°C, 1000 hours

±5%

Humidity aging

85°C, 85% RH, 1000 hours

±5%

Thermal shock

125°C, -40°C (10 times)

±5%

Solvent resistance

MIL-STD-202, Method 215F

No change

Note: See PS400 for other environmental specifications.

AHEF

Physical Characteristics

Environmental Specifications

Lead material

Tin-plated brass to MIL-T-10727B

Soldering characteristics

Solderability per ANSI-J-STD-002 Category 1

Solder heat withstand

per IEC-STD 68-2-20, Test Tb, Section 5, Method 1A

Flammability

per IEC 695-2-2 Needle flame test for 20 seconds

Operation temperature

-40°C~125°C

Note: See PS400 for other physical characteristics.

Test

Conditions

Resistance Change

Passive aging

70°C, 1000 hours

±3% Typical

85°C, 1000 hours

±5% Typical

Humidity aging

85°C, 85% RH, 1000 hours

±1.2% Typical

Thermal shock

125°C, -40°C (20 times)

-33% Typical

Solvent resistance

Freon

No change

Trichloroethane

No change

Hydrocarbons

No change

Note: See PS400 for other environmental specifications.

AHS

Physical Characteristics

Environmental Specifications

Table A5 Physical Characteristics and Environmental Specifications for Automotive Devices

Cont’d