PCF8564AUSLASH10ABSLASH1 datasheet(38/44 Pages) NXP

38 / 44 page

PCF8564A_1

Product data sheet

Rev. 1 — 8 October 2009

38 of 44

NXP Semiconductors

PCF8564A

Real time clock and calendar

All NXP WLCSP packages are lead-free.

19.2 Board mounting

Board mounting of a WLCSP requires several steps:

1. Solder paste printing on the PCB

2. Component placement with a pick and place machine

3. The reﬂow soldering itself

19.3 Reﬂow soldering

Key characteristics in reﬂow soldering are:

• Lead-free versus SnPb soldering; note that a lead-free reﬂow process usually leads to

higher minimum peak temperatures (see Figure 34) than a PbSn process, thus

reducing the process window

• Solder paste printing issues, such as smearing, release, and adjusting the process

window for a mix of large and small components on one board

• Reﬂow temperature proﬁle; this proﬁle includes preheat, reﬂow (in which the board is

heated to the peak temperature), and cooling down. It is imperative that the peak

temperature is high enough for the solder to make reliable solder joints (a solder paste

characteristic) while being low enough that the packages and/or boards are not

damaged. The peak temperature of the package depends on package thickness and

volume and is classiﬁed in accordance with Table 35.

Moisture sensitivity precautions, as indicated on the packing, must be respected at all

times.

Studies have shown that small packages reach higher temperatures during reﬂow

soldering, see Figure 34.

Table 35.

Lead-free process (from J-STD-020C)

Package thickness (mm)

Package reﬂow temperature (

°C)

Volume (mm3)

< 350

350 to 2000

> 2000

< 1.6

260

1.6 to 2.5

260

250

245

> 2.5

250

245

PCF8564AU/10AB/1 数据表(PDF) 38 Page - NXP Semiconductors

PCF8564AU/10AB/1 数据表(HTML) 38 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

数据表下载