Low-Cost, Ultra-Small, Single/Dual/Quad

Single-Supply Comparators

_______________________________________________________________________________________

3

ELECTRICAL CHARACTERISTICS (continued)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

2

≥ 20mV

165

400

2

Output Voltage-Swing

≥ 20mV

165

400

mV

Output Short-Circuit Current

45

mA

Shutdown Mode Output

Leakage

(Note 1)

±0.01

±3.5

μA

228

Propagation Delay

Ω,

188

ns

Rise/Fall-Time

20

ns

Shutdown Delay Time ON/OFF

(Note 1)

40

ns

Shutdown Delay Time OFF/ON

(Note 1)

400

ns

Power-On Time

200

ns

Maximum Capacitive Load

No sustained oscillations

150

pF

Note 1: MAX9030 only.

Note 2: All devices are production tested at +25°C. All temperature limits are guaranteed by design.

Note 3: Comparator Input Offset is defined as the center of the hysteresis zone.

Note 4: Hysteresis is defined as the difference of the trip points required to change comparator output states.

Note 6: Rise and fall times are measured between 10% and 90% at OUT.

Typical Operating Characteristics

28

32

30

36

34

38

40

2.5

3.5

4.0

3.0

4.5

5.0

5.5

SUPPLY CURRENT

vs. SUPPLY VOLTAGE

SUPPLY VOLTAGE (V)

32

34

33

36

35

37

38

-50

25

50

-25

0

75

100

125

SUPPLY CURRENT

vs. TEMPERATURE

TEMPERATURE (

°C)

1000

10

10

100

OUTPUT TRANSITION FREQUENCY (Hz)

SUPPLY CURRENT

vs. OUTPUT TRANSITION FREQUENCY

100

1k

10k

100k

1M