E3X-DRT21/SRT21/CIF11

2

Ordering Information

Communications Units

Terminal-block Unit

* Order Fiber Amplifiers and Wiring-reduction Connectors as sets.

Ratings and Specifications

Communications Units

*1. Connection is not supported for Pre-wired Amplifiers (e.g., E3X-DA11-N) and water-resistant Amplifiers (e.g., E3X-DA11V).

*2. Connection is supported for products manufactured on or after the date shown below (indicated with the lot number).

Connection is also supported for models with “MADE IN JAPAN” on the cover underlined.

*3. Does not include the current supplied to the Fiber Amplifier.

Terminal-block Unit

Communications method

Model

DeviceNet

E3X-DRT21

CompoBus/S

E3X-SRT21

RS-422

E3X-CIF11

Communications method

Model

All communications methods

E39-TM1

Communications method

Model

All communications methods

E3X-DA6-P

Communications method

Model

---

E3X-CN02

Item

Model

E3X-DRT21

E3X-SRT21

E3X-CIF11

Communications method

DeviceNet

CompoBus/S

RS-422

E3X-DA6TW, E3X-DA8TW, E3X-DA6-P, E39-TM1

Number of connectable Fiber

Amplifiers

16 max.

14 max.

16 max.

Power supply voltage

11 to 25 VDC

14 to 26.4 VDC

11.4 to 26.4 VDC

(12 VDC

−5% to 24 VDC +10%)

30 mA max.

40 mA max.

Ambient temperature

Operating:

−20 to 55°C, Storage: −30 to 70°C (with no icing or condensation)

Ambient humidity

35% to 85% (with no condensation)

Weight (packed state)

Approx. 150 g

Approx. 200 g

Lot No.1 8 6 0 1

Manufactured on 18 June 2001.

Last two digits of the year of manufacture.

Month of manufacture. October, November, and December are represented with X, Y, and Z respectively.

Day of manufacture.

Item

Model

E39-TM1

12 to 24 VDC

±10%, ripple (p-p) 10% max.

Sensor power supply

11 to 23 VDC (power supply voltage

−1 V)

Current consumption

40 mA max. + Sensor current consumption (total: 100 mA max.)

Response speed

1.2 ms max.

Number of inputs

1 point

Input signals

NPN/PNP no-voltage input (contact and non-contact), switchable

Input operating configuration N.O./ N.C., switchable

Indicators

Input signal display (orange)

Operating:

Groups of 1 to 3 Units:

−25 to 55°C (with no icing or condensation)

Groups of 4 to 8 Units:

−25 to 45°C (with no icing or condensation)

Groups of 9 to 16 Units:

−25 to 40°C (with no icing or condensation)

Storage:

−30 to 70°C

*1. The power supply for the E39-

TM1 is provided from the

Communications Unit (order

separately). Use an E3X-CN02

(order separately) Connector.

*2. When 4 or more Units are grouped

together, the current consumption

per Unit must not exceed 75 mA.

When using together with the

E3X-DA-N Fiber Amplifiers,

connect the E39-TM1 Units at the

end of the group.

In this case, the upper limit for the

ambient temperature for the E3X-

DA-N Amplifiers is the rated upper

limit

−5°C.