MB-0054-8

2/22

JAE PMK Div. Proprietary. Copyright © 2009, Japan Aviation Electronics Industry, Ltd.

General Specifications

JAHL-5111

JAHL-5111

Instruction Manual

500 mating cycles

500 mating cycles

Durability

Specification and Performance

Item

JACS-5111-2

JACS-5111

Product Specification

Receptacle: Solder connection

Cable connecting receptacle and plug:

Solder connection

Receptacle: Through-hole, solder

Cable connecting receptacle:

Crimp connection 20 to 28AWG

Plug: Crimp connection 20 to 28AWG

Solder connection 20AWG max.

Specification of Wire

Connection

-20 Deg. C to +125 Deg.C

-20 Deg. C to +125 Deg.C

Operating Temperature

without leakage

without leakage

Airtightness

(Individually Waterproofed)

IP67

IP67

Waterproof

1000M ohm min.(DC500V energized )

1000M ohm min.(DC500V energized )

Insulation Resistance

2000VAC (per minute)

900VAC (per minute)

Withstanding Voltage

200VAC

200VAC

Rated Voltage

5A/pin (#20 size contact)

3A/pin (#22 size contact)

Rated Current

4 pins

10 pins

No. of Contacts

Features

•All plastic lightweight connector.

•Easy and sure mating with push-and-twist type one-touch lock mechanism.

•Terminal specification for receptacle and plug differs by series and number of contacts, please

refer to general specification for each product. Socket contact for 10 pos. plug is available in crimp

and solder types.

•The 4-contact receptacle is not body grounded. Connection of ground contact and chassis is

needed for grounding.

•Crimp connection relay receptacle is available in cable-connecting and wall-mounting receptacle

types. (4 pos. and 10 pos.)

•Plug is available in straight, angle and individual types (10 pos. only). The cable direction of the

angle plug can be set in four directions by rotating the plug in 90 degree increments.

•Mating height of angle plug is 30.8mm from panel surface (4 pos. and 10 pos.). Individual plug is

low profile 16.9mm (10 pos.).

•Waterproof and dustproof conforming to IP67.

•Superb environment-proof performance such as vibration and oil resistance.

•Suitable for conduit mounting (cannot be attached to individual plug).

•Compatible with JN1, considerably reinforced with metal material in part of the outer shell (strength

increased three fold over JN1).

•Uses same crimp contact as the JN1.

•Terminal specification for receptacle and plug differs by series and number of contacts, please

refer to general specification for each product. 4-contact receptacle body is grounded.

•4-contact type is TUV qualified.

•Plug is available in straight and angle types. The cable direction of the angle plug can be set in

four directions by rotating the plug in 90 degree increments.

•Contact variations: 4, 10 pos.

•Angle plug mating height is 31.3mm from cabinet surface (4, 10 pos.).

•Waterproof and dustproof conforming to IP67.

•Superb environment-proof performance such as vibration and oil resistance.

•Suitable for conduit mounting.

[JN2]

[JN1]

[JN1]