| 数据搜索系统,热门电子元器件搜索 |
|
SC667 数据表(PDF) 39 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
SC667 数据表(HTML) 39 Page - Semtech Corporation |
|
39 / 47 page ![]() SC667 39 Lighting Effects Assignment Register (0Eh) This register is used to assign the backlight LEDs to four banks, bank #1, bank #2, bank #3, and bank #4. This regis- ter is also used to assign the banks to two groups, group #1 and group #2. Group #1 and group #2 are assigned independently to a lighting effect and an effect rate, as described in the next section, Effect Rate Options. GRP1 and GRP0 [D4:D3] These bits are used to assign banks into two groups of independent lighting effects and effect rates. The group assignments are shown in Table 14. Table 14 — Lighting Effect Assignments GRP1 GRP0 Bank(s) Assigned Group #1 Bank(s) Assigned to Group #2 0 0 #1 #2, #3, and #4 0 1 #1 and #2 #3 and #4 1 0 #1, #2, and #3 #4 1 1 #1,# 2, #3, and #4 no banks assigned BANK2, BANK1, and BANK0 [D2:D0] These bits provide bank assignments for all backlight LEDs. Backlight bank assignments are shown in Table 15. The table shows the backlight pins assigned to each of the four banks, as assigned by the data bits BANK2, BANK1, and BANK0. Table 15 — Backlight Bank Assignments Bank #4 Bank #3 Bank #2 Bank #1 0 0 0 - - - BL1 - BL7 0 0 1 - - BL1 BL2 - BL7 0 1 0 - - BL1 - BL2 BL3 - BL7 0 1 1 - BL1 BL2 BL3 - BL7 1 0 0 - - BL1 - BL3 BL4 - BL7 1 0 1 BL1 BL2 BL3 BL4 - BL7 1 1 0 BL1 BL2 BL3 - BL4 BL5 - BL7 1 1 1 BL1 BL2 BL3 - BL5 BL6 - BL7 Register Map (continued) Effect Rate Options (0Fh) This register is used to set the effects rate for the fade and breathe effects. Different effect rates may be applied to group #1 and group #2. ER2_2, ER2_1, and ER2_0 [D5:D3] Banks assigned to group #2 will step through settings at the rate shown in Table 16. Table 16 — Effect Rates for Group #2 ER2_2 ER2_1 ER2_0 Breathe Rate (ms�step) Fade Rate (ms�step) 0 0 0 snap to target snap to target 0 0 1 4 1 0 1 0 8 2 0 1 1 16 4 1 0 0 24 6 1 0 1 32 8 1 1 0 48 12 1 1 1 64 16 ER1_2, ER1_1, and ER1_0 [D2:D0] Banks assigned to group #1 will step through settings at the rate shown in table 17. Table 17 — Effect Rates for Group #1 ER1_2 ER1_1 ER1_0 Breathe Rate (ms�step) Fade Rate (ms�step) 0 0 0 snap to target snap to target 0 0 1 4 1 0 1 0 8 2 0 1 1 16 4 1 0 0 24 6 1 0 1 32 8 1 1 0 48 12 1 1 1 64 16 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |