GPRS datasheet(13/15 Pages) KYL

13 / 15 page

Shenzhen KYL Communication Equipment Co., Ltd

www.rf-data.com

Fax: 86-755-83408785

sales02@rf-data.com

c. Send SMS noadminsms+password to cancel the SMS center. Response

SMS format: authorized number+Geo-info

5.20 Set up GPRS

The user needs to set IP address and Port by SMS to start the function of GPRS.

Set up: Send SMS ip+space+IP address+space+port, and it will reply

SMS ”set IP address and Port OK”

For example: Send SMS “ip 123.98.43.254 port2456”to the device

5.21 Set up Sending data mode for GPS.

Set up Sending data mode for GPS, and then it can send GPS data to IP address.

(Refer to5.21).

After this setting, you can call or send SMS to the tracker. The tracker will hand

the

call

and

SMS

“Serial

number+authorized

number+GPRMC+command+IMEI number+CRC16 “to IP address.

5.22 Modes switch between “telephone” and “web”

For sending GPS data to your IP address, you should set up the sending mode

for GPS data.

Set up: Send SMS web+password to device. For example, password is

123456.Send SMS “web123456”to the device, if you set successfully, the device

will reply SMS “set web ok’. After this, you can call or send SMS to the tracker.

The tracker will hang up the phone and report the GPS data to IP address.

If you want to send GPS data to a telephone, you can send SMS

telephone+password to the device. If set successfully, the device will reply ‘set

telephone ok’. And then, the device will send GPS data to your telephone by

GPRS 数据表(PDF) 13 Page - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.