16F1825 datasheet(3/420 Pages) MICROCHIP

3 / 420 page

 2010 Microchip Technology Inc.

Preliminary

DS41440A-page 3

High-Performance RISC CPU:

• Only 49 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 32 MHz oscillator/clock input

- DC – 125 ns instruction cycle

• Up to 8 Kbytes Linear Program Memory

Addressing

• Up to 1024 bytes Linear Data Memory Addressing

• Interrupt Capability with automatic context saving

• 16-Level Deep Hardware Stack with Optional

Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Flexible Oscillator Structure:

• Precision 32 MHz Internal Oscillator Block:

- Factory calibrated to ± 1%, typical

- Software selectable frequencies range of

31 kHz to 32 MHz

• 31 kHz Low-Power Internal Oscillator

• Four Crystal modes up to 32 MHz

• Three External Clock modes up to 32 MHz

• 4X Phase Lock Loop (PLL)

• Fail-Safe Clock Monitor:

- Allows for safe shutdown if peripheral clock

stops

• Two-Speed Oscillator Start-up

• Reference Clock Module:

- Programmable clock output frequency and

duty-cycle

Special Microcontroller Features:

• 1.8V-5.5V Operation – PIC16F1825/1829

• 1.8V-3.6V Operation – PIC16LF1825/1829

• Self-Programmable under Software Control

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Programmable Brown-out Reset (BOR)

• Extended Watchdog Timer (WDT)

• In-Circuit Serial Programming™ (ICSP™) via

two pins

• In-Circuit Debug (ICD) via Two Pins

• Enhanced Low-Voltage Programming (LVP)

• Operating Voltage Range:

- 1.8V-5.5V (PIC16F1825/1829)

- 1.8V-3.6V (PIC16LF1825/1829)

• Programmable Code Protection

• Power-Saving Sleep mode

Extreme Low-Power Management

PIC16LF1825/1829 with nanoWatt XLP:

• Sleep mode: 20 nA

• Watchdog Timer: 500 nA

• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:

• Analog-to-Digital Converter (ADC) Module:

- 10-bit resolution, up to 12 channels

- Auto acquisition capability

- Conversion available during Sleep

• Analog Comparator Module:

- Two rail-to-rail analog comparators

- Power mode control

- Software controllable hysteresis

• Voltage Reference Module:

- Fixed Voltage Reference (FVR) with 1.024V,

2.048V and 4.096V output levels

- 5-bit rail-to-rail resistive DAC with positive

and negative reference selection

Peripheral Highlights:

• Up to 17 I/O Pins and 1 Input Only Pin:

- High current sink/source 25 mA/25 mA

- Programmable weak pull-ups

- Programmable interrupt-on-change pins

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated, low-power 32 kHz oscillator driver

• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit

Period Register, Prescaler and Postscaler

• Two Capture, Compare, PWM (CCP) Modules

• Two Enhanced CCP (ECCP) Modules:

- Software selectable time bases

- Auto-shutdown and auto-restart

- PWM steering

• Up to two Master Synchronous Serial Port

(MSSP) with SPI and I2CTM with:

- 7-bit address masking

- SMBus/PMBusTM compatibility

• Enhanced Universal Synchronous Asynchronous

Receiver Transmitter (EUSART) Module

• mTouch™ Sensing Oscillator Module:

- Up to 12 input channels

• Data Signal Modulator Module:

- Selectable modulator and carrier sources

•SR Latch:

- Multiple Set/Reset input options

- Emulates 555 Timer applications

PIC16F/LF1825/1829

14/20-Pin Flash Microcontrollers with nanoWatt Technology

16F1825 数据表(PDF) 3 Page - Microchip Technology

16F1825 数据表(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载