M95080-R datasheet(48/50 Pages) STMICROELECTRONICS

48 / 50 page

Revision history

M95160-x, M95080-x

48/50

Doc ID 8028 Rev 10

24-May-2007

Document reformatted. Small text changes.

TSSOP8 3 x 3 mm (DS) package removed, 1.65 V to 5.5 V operating

voltage range removed (M95080-S and M95160-S removed).

Figure 4: Bus master and memory devices on the SPI bus updated, note 2

removed and explanatory paragraph added (see Section 3: Connecting to

the SPI bus).

Section 2.7: VCC supply voltage and Section 2.8: VSS ground added.

Power-up, Device Internal Reset and Power-down replaced by

Section 4.1: Supply voltage (VCC).

Command termination specified in Section 6.4: Write Status Register

(WRSR).

Blank process no longer available for M95160, M95080, M95160-W and

M95080-W in the device grade 3 range.

L, GB and SB processes no longer available for M95160 and M95080, in

the device grade 6 range.

L process no longer available for M95160-W and M95080-W in the device

grade 6 range.

ICC1 value and test conditions modified in Table 19: DC characteristics

(M95160-R and M95080-R).

End timing line of tSHQZ modified in Figure 17: Serial output timing.

SO8N and UFDFPN8 package specifications updated. All packages are

ECOPACK® compliant.

Blank option removed below Plating technology and Note 2 modified in

Table 32: Ordering information scheme.

Table 33: Available M95160 products (package, voltage range,

temperature grade) and Table 34: Available M95080 products (package,

voltage range, temperature grade) added.

06-Mar-2008

Endurance modified on page 1. Small text changes.

Section 4.1: Supply voltage (VCC) on page 12 modified.

Section 6.6: Write to Memory Array (WRITE) on page 23 modified.

Table 19: DC characteristics (M95160-R and M95080-R) updated.

Note removed below Table 24: AC characteristics (M95160-W and

M95080-W, device grade 6) on page 35.

Inch values are calculated from millimeters and rounded to 4 decimal

digits and UFDFPN package specifications updated (see Section 10:

Package mechanical data on page 41).

26-Jan-2009

WLCSP (CS) package added (see Figure 20 and Table 30: WLCSP-R

1.350 x 1.365 mm 0.4 mm pitch 8 bumps, package mechanical data).

M95160-F part number added (delivered in WLCSP package and device

grade 6 only).

Section 2.7: VCC supply voltage and Section 6.4: Write Status Register

(WRSR) updated.

Table 27: AC characteristics (M95160-F) added.

Figure 15: Serial input timing, Figure 16: Hold timing and Figure 17: Serial

output timing updated.

Table 35.

Document revision history (continued)

Date

Revision

Changes

M95080-R 数据表(PDF) 48 Page - STMicroelectronics

M95080-R 数据表(HTML) 48 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

数据表下载