MF1ICS70_043544

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2010. All rights reserved.

Product data sheet

PUBLIC

Rev. 4.4 — 25 November 2010

043544

5 of 20

NXP Semiconductors

MF1ICS70

Functional specification

6.2.3 Select card

With the select card command the reader selects one individual card for authentication

and memory related operations. The card returns the Answer To Select (ATS) code

(=18h), which determines the type of the selected card. Please refer to the document

“MIFARE‚ Standardized Card Type Identification Procedure” for further details.

6.2.4 Three pass authentication

After selection of a card the reader specifies the memory location of the following memory

access and uses the corresponding key for the three pass authentication procedure. After

a successful authentication all memory operations are encrypted.

Fig 3.

Three pass authentication

Request Standard

Request All

Anticollision Loop

Get Serial Number

Select Card

3 Pass Authentication

sector specific

Read

Block

Write

Block

Decre-

ment

Incre-

ment

Re-

store

Halt

Transfer

Identification and Selection

Procedure

3 ms without collision

+ 1 ms for each collision

Typical Transaction

Authentication Procedure

2 ms

Transaction

POR

Memory Operations

2.5 ms

read block

6.0 ms

write block

2.5 ms

dec/increment

4.5 ms

transfer