x0FLGb Output. The FLGb output in axis-0. The FLGb

output is configured by MCR1 to function as either Sign

or Up/Down count direction indicator.

When configured as Sign, the FLGb output remains high

when CNTR is in an underflow state (caused by down

counts at or below zero), indicating a negative number.

When the CNTR counts up past zero, FLGb switches low,

indicating a positive number.

When configured as Up/Down indicatior, a high at the

FLGb indicates that the current count direction is up (in-

cremental) whereas a low indicates that the direction is

down or decremental.

The FLGb output can be disabled to remain at a fixed

logic high.

7766-062207-7

x1FLGb Output. The FLGb output of axis-1.

Functionally, it is identical with the FLGb output of axis-0.

x0CKO Output. Axis-0 count clock output. In non-

quadrature mode, the CKO output is identical with the in-

put-A clock. In quadrature mode, CKO is derived from the

filtered and decoded quadrature clocks applied at the A and

B inputs. In either mode CKO is a true representative of the

internal count clock.

x1CKO Output. Axis-1 count clock output.

Functionally, it is identical with the CKO output of axis-0.

GND. Supply voltage. Negative terminal.

The information included herein is believed to be

accurate and reliable. However, LSI Computer Systems,

Inc. assumes no responsibilities for inaccuracies, nor for

any infringements of patent rights of others which may

result from its use.