| 数据搜索系统,热门电子元器件搜索 |
|
PPC5643LFF0MLQ8 数据表(PDF) 15 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
PPC5643LFF0MLQ8 数据表(HTML) 15 Page - Freescale Semiconductor, Inc |
|
15 / 124 page ![]() Introduction MPC5643L Microcontroller Data Sheet, Rev. 6 Preliminary—Subject to Change Without Notice Freescale Semiconductor 15 — Individual programmable filters for each mailbox — 8 mailboxes configurable as a 6-entry receive FIFO — 8 programmable acceptance filters for receive FIFO • Programmable clock source — System clock — Direct oscillator clock to avoid FMPLL jitter 1.6.27 FlexRay The FlexRay module provides the following features: • Full implementation of FlexRay Protocol Specification 2.1 Rev. A • 64 configurable message buffers can be handled • Dual channel or single channel mode of operation, each as fast as 10 Mbit/s data rate • Message buffers configurable as transmit or receive • Message buffer size configurable • Message filtering for all message buffers based on Frame ID, cycle count, and message ID • Programmable acceptance filters for receive FIFO • Message buffer header, status, and payload data stored in system memory (SRAM) • Internal FlexRay memories have error detection and correction 1.6.28 Serial communication interface module (LINFlexD) The LINFlexD module (LINFlex with DMA support) on this device features the following: • Supports LIN Master mode, LIN Slave mode and UART mode • LIN state machine compliant to LIN1.3, 2.0, and 2.1 specifications • Manages LIN frame transmission and reception without CPU intervention • LIN features — Autonomous LIN frame handling — Message buffer to store as many as 8 data bytes — Supports messages as long as 64 bytes — Detection and flagging of LIN errors (Sync field, delimiter, ID parity, bit framing, checksum and Time-out errors) — Classic or extended checksum calculation — Configurable break duration of up to 36-bit times — Programmable baud rate prescalers (13-bit mantissa, 4-bit fractional) — Diagnostic features (Loop back, LIN bus stuck dominant detection) — Interrupt driven operation with 16 interrupt sources • LIN slave mode features — Autonomous LIN header handling — Autonomous LIN response handling • UART mode — Full-duplex operation — Standard non return-to-zero (NRZ) mark/space format — Data buffers with 4-byte receive, 4-byte transmit — Configurable word length (8-bit, 9-bit, or 16-bit words) — Configurable parity scheme: none, odd, even, always 0 — Speed as fast as 2 Mbit/s |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |