SIZE

CODE IDENT NO.

UNSPECIFIED TOLERANCES

DWG NO.

REV.

SHEET

A

00136

N/A

DOC200103

C

2

1.

SCOPE

1.1

General. This specification defines the design, assembly and functional evaluation of high

reliability, hybrid TCXOs produced by Vectron International. Devices delivered to this

specification represent the standardized Parts, Materials and Processes (PMP) Program

developed, implemented and certified for advanced applications and extended environments.

1.2

Applications Overview. The designs represented by these products were primarily developed

for the MIL-Aerospace community. The lesser Design Pedigrees and Screening Options

imbedded within DOC200103 bridge the gap between Space and COTS hardware by providing

custom hardware with measures of mechanical, assembly and reliability assurance needed for

Military, Ruggedized COTS or Commercial environments.

2.

APPLICABLE DOCUMENTS

2.1

Specifications and Standards. The following specifications and standards form a part of this

document to the extent specified herein. The issue currently in effect on the date of quotation

will be the product baseline, unless otherwise specified. In the event of conflict between the

texts of any references cited herein, the text of this document shall take precedence.

Military

MIL-PRF-55310

Oscillators, Crystal Controlled, General Specification For

MIL-PRF-38534

Hybrid Microcircuits, General Specification For

Standards

MIL-STD-202

Test Method Standard, Electronic and Electrical Component Parts

MIL-STD-883

Test Methods and Procedures for Microelectronics

MIL-STD-1686

Electrostatic Discharge Control Program for Protection of Electrical and

Electronic Parts, Assemblies and Equipment

Vectron International

HT-67849

Test Specification, OS-68338 Hybrids, Hi-Rel Standard

QSP-90100

Quality Systems Manual, Vectron International

VL-65339

Identification Common Documents, Materials and Processes, Hi-Rel XO

3.

GENERAL REQUIREMENTS

3.1

Classification. All devices delivered to this specification are of hybrid technology conforming

to Type 1, Class 2 of MIL-PRF-55310. Primarily developed as a Class S specification, options

are imbedded within it to also produce Class B, Engineering Model and Commercial Model

devices. Devices carry a Class 2 ESDS classification.