Digital Attenuator, 4-Bit, Single Control

15 dB, 0.05 - 4.0 GHz

Rev. V2

MAADSS0013

2

•

North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

•

India Tel: +91.80.43537383

•

China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Reference Insertion Loss

1.0 GHz

dB

—

1.0

1.3

Attenuation Accuracy

1.0 GHz

± (0.2 dB + 2% of attenuation setting in dB) dB

VSWR

0.05 - 4.0 GHz

Ratio

—

1.5:1

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

ns

—

40

—

Ton, Toff

50% Control to 90% RF,

50% Control to 10% RF

ns

—

65

—

Transients

In Band

mV

—

75

—

Input P1dB

2.0 GHz

dBm

—

30

—

2-Tone, +5 dBm/tone, 1 MHz Spacing

0.5 GHz

2.0 GHz

dBm

—

—

75

80

—

—

2-Tone, +5 dBm/tone, 1 MHz Spacing

0.5, 2.0 GHz

dBm

—

42

—

µA

—

15

25

µA

—

170

250

7. External DC blocking capacitors are required on all RF ports.

8. Low frequency performance is determined by DC block and GND capacitor value.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

VC1

VC2

VC4

VC8

Attenuation (dB)

0

0

0

0

Reference IL

1

0

0

0

1

0

1

0

0

2

0

0

1

0

4

0

0

0

1

8

1

1

1

1

15

9. 0 = 0 V , 1 = +2.8 to 5 V.