PR29MF21NSZ Series

PR39MF2xNSZ Series

■ Features

DIP 8pin

Triac output SSR

3. 8 pin DIP package (SMT gullwing also available)

4. High repetitive peak off-state voltage

datasheet)

6. Superior noise immunity (dV/dt : MIN. 100V/µs)

8. Lead-free terminal components are also available

(see Model Line-up section in this datasheet)

9. High isolation voltage between input and output

■ Description

PR29MF21NSZ Series and PR39MF2xNSZ Series

Solid State Relays (SSR) are an integration of an

infrared emitting diode (IRED), a Phototriac Detector

and a main output Triac. These devices are ideally

suited for controlling high voltage AC loads with solid

state reliability while providing 4.0kV isolation

1

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

PR29MF21NSZ Series

PR39MF2xNSZ Series

Sheet No.: D4-A00701EN

Date Mar. 31. 2004

© SHARP Corporation

■ Agency approvals/Compliance

1. Isolated interface between high voltage AC devices

and lower voltage DC control circuitry.

2. Switching motors, fans, heaters, solenoids, and

valves.

3. Power control in applications such as lighting and

temperature control equipment.

■ Applications

1. Recognized by UL508, file No. E94758 (as model No.

R29MF2/R39MF2)

2. Approved by CSA 22.2 No.14, file No. LR63705 (as

model No. R29MF2/R39MF2)

2), file No. 40008898 (only for PR39MF2xNSZ Series

as model No. R39MF2)

4. Package resin : UL flammability grade (94V-0)

Up to Date code "RD" (December 2003), approval of DIN

VDE0884.

From Date code "S1" (January 2004), approval of DIN

EN60747-5-2.

(PR29MF1xNSZ Series/PR39MF1xNSZ Series)