LCD Switches

Programmable OLED Video Switch and Display

IS Series

sales@greatecs.com

www.greatecs.com

7

PRECAUTIONS FOR HANDLING & STORAGE

Handling

1. The IS Series OLED devices are electrostatic sensitive. To avoid damage to IC, do not touch keytops unless

properly isolated from static electricity.

2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the

display. Follow directions regarding supply sequences of power and signal voltages.

3. If the OLED panel is broken, avoid contact with the contents and wash o any spills to the skin or clothing.

4. Limit operating force to switch keytop to 100.0N maximum, as excessive pressure may damage the OLED.

5. For OLED display, it is necessary for terminal of metal cover to be connected to a ground.

6. Recommended soldering time and temperature limits for OLED switch or display:

11 seconds maximum @ 270°C maximum; avoid temperatures exceeding 80°C at the OLED.

7. The IS series OLED devices are not process sealed.

8. If OLED unit is operated with the same display pattern, the di erence between the operation duration of

adjacent pixels may be interpreted as di erence between luminosity of pixels. To minimize this di erence,

operate OLED unit so that each pixel may be turned on at frequency as equal as possible.

9. For switch, clean cap surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using

neutral cleanser and dry with clean cloth. Do not use organic solvent. For display, avoid contact with any

ux or detergent. If any liquids spill on display surface, immediately wipe with soft absorbent cloth.

Storage

1. Store in original container and away from direct sunlight.

2. Keep away from static electricity.

3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.

ATTENTION

ELECTROST AT IC

SENSITIVE DEVICES